Caution

• Adapters ARE NOT recommended as permanent installations. The proper regulator for each gas should be used on all cylinders and systems
• Adapters are used to connect a regulator to a cylinder or other equipment where there are two differnet CGA threads on the mating parts making a direct connection impossible
• Adapters must be selected with care to insure that regulators and other equipment are not used on gases that are incompatible or vary in pressure rating. A mixture of non-compatible gases in any system is a possible hazard. Therefore, regulators and all other parts of an adapted system must be thoroughly purged of all contaminants, especially organic material and residual gases. Replace worn or damaged fittings immediately to insure safe and dependable operation
• Safety First Western strongly encourages users of compressed gases to adhere to all safety guidelines and practices. Only an absolute and constant respect for compressed gases is acceptable for safe operations. Refer to the Western safety products such as check valves, flash arrestors, and relief valves